Certified Company
DNV&ABSCertified Company
DNV&ABSCertified Company
ISO 9001:2008R&D Production
In ChinaStainless W material is SAE SAE J 467 (1968) Special Purpose Alloys ("Superalloys") Special Purpose Alloys ("Superalloys").
Chemical composition of Stainless W, Stainless W mechanical properties, Stainless W datasheet, Stainless W equivalent grade, Heat treatment and temperature process of Stainless W.
Stainless W |
C: | Max | 0.06 |
Si: | Max | 0.60 |
Mn: | Max | 0.55 |
Cr: | Max | 17.00 |
Ni: | Max | 7.00 |
Mo: | Max | Min |
Co: | Max | Min |
W: | Max | Min |
Al: | Max | 0.20 |
Cu: | Max | Min |
Ti: | Max | 0.80 |
Fe: | Max | remaining |
N: | Max | 0.02 |
Rp0.2 (MPa) | 485 (≥) |
Rm (MPa) | 469 (≥) |
AKV (J) | 31 |
A (%) | 41 |
Z (%) | 42 |
Hardness | HBW 314 |
Stainless W Round bar: | 1mm-800mm |
Stainless W Square bar: | 10mm * 10mm-600mm *600mm |
Stainless W Flat bar: | Thickness:8mm-800mm Width:10mm to 1500mm |
Stainless W Sheet or Plate: | Thickness:3mm-80mm Width:1.5mm to 1500mm |
Stainless W Strip or Coil: | Thickness:0.1mm-3mm Width:1.5mm-1500mm |
Stainless W Forgings: | Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes |