Certified Company
DNV&ABSCertified Company
DNV&ABSCertified Company
ISO 9001:2008R&D Production
In ChinaUNISPAN LR 35 material is SAE SAE J 470 (1976) Wrought Nickel and Nickel-Related Alloys Wrought Nickel and Nickel-Related Alloys.
Chemical composition of UNISPAN LR 35, UNISPAN LR 35 mechanical properties, UNISPAN LR 35 datasheet, UNISPAN LR 35 equivalent grade, Heat treatment and temperature process of UNISPAN LR 35.
C: | Max | 0.05 |
Si: | Max | 0.60 |
Mn: | Max | 0.80 |
Cr: | Max | 20.00 |
Ni: | Max | 25.00 |
Mo: | Max | Min |
Co: | Max | Min |
W: | Max | Min |
Al: | Max | Min |
Cu: | Max | Min |
Ti: | Max | Min |
Fe: | Max | Min |
Nb: | Max | 0.60 |
Rp0.2 (MPa) | 142 (≥) |
Rm (MPa) | 512 (≥) |
AKV (J) | 43 |
A (%) | 44 |
Z (%) | 43 |
Hardness | HBW 221 |
UNISPAN LR 35 Round bar: | 1mm-800mm |
UNISPAN LR 35 Square bar: | 10mm * 10mm-600mm *600mm |
UNISPAN LR 35 Flat bar: | Thickness:8mm-800mm Width:10mm to 1500mm |
UNISPAN LR 35 Sheet or Plate: | Thickness:3mm-80mm Width:1.5mm to 1500mm |
UNISPAN LR 35 Strip or Coil: | Thickness:0.1mm-3mm Width:1.5mm-1500mm |
UNISPAN LR 35 Forgings: | Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes |