Certified Company
DNV&ABSCertified Company
DNV&ABSCertified Company
ISO 9001:2008R&D Production
In ChinaUNITEMP 750 material is SAE SAE J 470 (1976) Wrought nickel and nickel-related alloys Wrought nickel and nickel-related alloys.
Chemical composition of UNITEMP 750, UNITEMP 750 mechanical properties, UNITEMP 750 datasheet, UNITEMP 750 equivalent grade, Heat treatment and temperature process of UNITEMP 750.
UNITEMP 750 |
C: | Max | 0.04 |
Si: | Max | Min |
Mn: | Max | Min |
Cr: | Max | 15.50 |
Ni: | Max | remaining |
Mo: | Max | Min |
Co: | Max | Min |
W: | Max | Min |
Al: | Max | 1.20 |
Cu: | Max | Min |
Ti: | Max | 2.30 |
Fe: | Max | 7.00 |
Nb: | Max | 1.00 |
B: | Max | 0.003 |
Rp0.2 (MPa) | 219 (≥) |
Rm (MPa) | 118 (≥) |
AKV (J) | 22 |
A (%) | 34 |
Z (%) | 12 |
Hardness | HBW 131 |
UNITEMP 750 Round bar: | 1mm-800mm |
UNITEMP 750 Square bar: | 10mm * 10mm-600mm *600mm |
UNITEMP 750 Flat bar: | Thickness:8mm-800mm Width:10mm to 1500mm |
UNITEMP 750 Sheet or Plate: | Thickness:3mm-80mm Width:1.5mm to 1500mm |
UNITEMP 750 Strip or Coil: | Thickness:0.1mm-3mm Width:1.5mm-1500mm |
UNITEMP 750 Forgings: | Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes |