Certified Company
DNV&ABSCertified Company
DNV&ABSCertified Company
ISO 9001:2008R&D Production
In ChinaW-545 material is SAE SAE J 467 (1968) Special Purpose Alloys ("Superalloys") Special Purpose Alloys ("Superalloys").
Chemical composition of W-545, W-545 mechanical properties, W-545 datasheet, W-545 equivalent grade, Heat treatment and temperature process of W-545.
W-545 |
C: | Max | 0.03 |
Si: | Max | 0.80 |
Mn: | Max | 1.65 |
Cr: | Max | 13.50 |
Ni: | Max | 26.00 |
Mo: | Max | 1.75 |
Co: | Max | Min |
W: | Max | Min |
Al: | Max | 0.15 |
Cu: | Max | Min |
Ti: | Max | 3.00 |
Fe: | Max | remaining |
B: | Max | 0.02 |
Rp0.2 (MPa) | 835 (≥) |
Rm (MPa) | 245 (≥) |
AKV (J) | 41 |
A (%) | 22 |
Z (%) | 32 |
Hardness | HBW 332 |
W-545 Round bar: | 1mm-800mm |
W-545 Square bar: | 10mm * 10mm-600mm *600mm |
W-545 Flat bar: | Thickness:8mm-800mm Width:10mm to 1500mm |
W-545 Sheet or Plate: | Thickness:3mm-80mm Width:1.5mm to 1500mm |
W-545 Strip or Coil: | Thickness:0.1mm-3mm Width:1.5mm-1500mm |
W-545 Forgings: | Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes |