High quality special steel supplier.Old rev.
  • Certified Company

    DNV&ABS
  • Certified Company

    ISO 9001:2008
  • R&D Production

    In China

X20Cr13


X20Cr13 material is AFNOR NF EN 10088-1 Stainless steels - Part 1: List of stainless steels AFNOR NF EN 10088-2 Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes AFNOR NF EN 10088-3 Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes AFNOR NF EN 10088-4 Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes AFNOR NF EN 10088-5 Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes AFNOR NF EN 10151 Stainless steel strip for springs - Technical delivery conditions AFNOR NF EN 10250-4 Open die steel forgings for general engineering purposes - Part 4: Stainless steels Open die steel forgings for general engineering purposes - Part 4: Stainless steels.

Chemical composition of X20Cr13, X20Cr13 mechanical properties, X20Cr13 datasheet, X20Cr13 equivalent grade, Heat treatment and temperature process of X20Cr13.


X20Cr13 property sheet

X20Cr13 Spec.

AFNOR NF EN 10088-1
Stainless steels - Part 1: List of stainless steels
AFNOR NF EN 10088-2
Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
AFNOR NF EN 10088-3
Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
AFNOR NF EN 10088-4
Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes
AFNOR NF EN 10088-5
Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes
AFNOR NF EN 10151
Stainless steel strip for springs - Technical delivery conditions
AFNOR NF EN 10250-4
Open die steel forgings for general engineering purposes - Part 4: Stainless steels

Chemical Composition of X20Cr13

C: 0.16 0.25
Si: Max 1.00
Mn: Max 1.50
P: Max 0.040
S: Max 0.015
Cr: 12.00 14.00
Mo: Max Min
Ni: Max Min

Mechanical Properties of X20Cr13

Rp0.2 (MPa) 917 (≥)
Rm (MPa) 334 (≥)
AKV (J) 44
A (%) 34
Z (%) 31
Hardness HBW 213

X20Cr13 shape and dimensions

X20Cr13 Round bar: 1mm-800mm
X20Cr13 Square bar: 10mm * 10mm-600mm *600mm
X20Cr13 Flat bar: Thickness:8mm-800mm Width:10mm to 1500mm
X20Cr13 Sheet or Plate: Thickness:3mm-80mm Width:1.5mm to 1500mm
X20Cr13 Strip or Coil: Thickness:0.1mm-3mm Width:1.5mm-1500mm
X20Cr13 Forgings: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes