High quality special steel supplier.Old rev.
  • Certified Company

    DNV&ABS
  • Certified Company

    ISO 9001:2008
  • R&D Production

    In China

X2CrNiMo18-14-3


X2CrNiMo18-14-3 material is AFNOR NF EN 10028-7 Flat products made of steels for pressure purposes - Part 7: Stainless steels AFNOR NF EN 10088-1 Stainless steels - Part 1: List of stainless steels AFNOR NF EN 10088-2 Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes AFNOR NF EN 10088-3 Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes AFNOR NF EN 10088-4 Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes AFNOR NF EN 10088-5 Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes AFNOR NF EN 10216-5 (2004) Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes AFNOR NF EN 10217-7 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes AFNOR NF EN 10222-5 Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels AFNOR NF EN 10250-4 Open die steel forgings for general engineering purposes - Part 4: Stainless steels AFNOR NF EN 10253-3 Butt-welding pipe fittings - Part 3: Wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements AFNOR NF EN 10253-4 Butt-welding pipe fittings - Part 4: Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements AFNOR NF EN 10272 Stainless steel bars for pressure purposes AFNOR NF EN 10296-2 (2005) Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel AFNOR NF EN 10297-2 (2005) Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel.

Chemical composition of X2CrNiMo18-14-3, X2CrNiMo18-14-3 mechanical properties, X2CrNiMo18-14-3 datasheet, X2CrNiMo18-14-3 equivalent grade, Heat treatment and temperature process of X2CrNiMo18-14-3.


X2CrNiMo18-14-3 property sheet

X2CrNiMo18-14-3 Spec.

AFNOR NF EN 10028-7
Flat products made of steels for pressure purposes - Part 7: Stainless steels
AFNOR NF EN 10088-1
Stainless steels - Part 1: List of stainless steels
AFNOR NF EN 10088-2
Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
AFNOR NF EN 10088-3
Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
AFNOR NF EN 10088-4
Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes
AFNOR NF EN 10088-5
Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes
AFNOR NF EN 10216-5 (2004)
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes
AFNOR NF EN 10217-7
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes
AFNOR NF EN 10222-5
Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels
AFNOR NF EN 10250-4
Open die steel forgings for general engineering purposes - Part 4: Stainless steels
AFNOR NF EN 10253-3
Butt-welding pipe fittings - Part 3: Wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements
AFNOR NF EN 10253-4
Butt-welding pipe fittings - Part 4: Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements
AFNOR NF EN 10272
Stainless steel bars for pressure purposes
AFNOR NF EN 10296-2 (2005)
Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel
AFNOR NF EN 10297-2 (2005)
Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel

Chemical Composition of X2CrNiMo18-14-3

C: Max 0.030
Si: Max 1.00
Mn: Max 2.00
P: Max 0.045
S: Max 0.015
Cr: 17.00 19.00
Mo: 2.50 3.00
Ni: 12.00 15.00
N: Max 0.11

Mechanical Properties of X2CrNiMo18-14-3

Rp0.2 (MPa) 943 (≥)
Rm (MPa) 961 (≥)
AKV (J) 12
A (%) 11
Z (%) 44
Hardness HBW 331

X2CrNiMo18-14-3 shape and dimensions

X2CrNiMo18-14-3 Round bar: 1mm-800mm
X2CrNiMo18-14-3 Square bar: 10mm * 10mm-600mm *600mm
X2CrNiMo18-14-3 Flat bar: Thickness:8mm-800mm Width:10mm to 1500mm
X2CrNiMo18-14-3 Sheet or Plate: Thickness:3mm-80mm Width:1.5mm to 1500mm
X2CrNiMo18-14-3 Strip or Coil: Thickness:0.1mm-3mm Width:1.5mm-1500mm
X2CrNiMo18-14-3 Forgings: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes

Our Materials