High quality special steel supplier.Old rev.
  • Certified Company

    DNV&ABS
  • Certified Company

    ISO 9001:2008
  • R&D Production

    In China

X2CrNiMoN22-5-3


X2CrNiMoN22-5-3 material is ISO ISO 15510 (2010) Stainless steels -- Chemical composition ISO ISO 16143-1 (2004) Stainless steels for general purposes -- Part 1: Flat products ISO ISO 16143-2 (2004) Stainless steels for general purposes -- Part 2: Semi-finished products, bars, rods and sections ISO ISO 16143-3 (2005) Stainless steels for general purposes -- Part 3: Wire ISO ISO 9327-5 (1999) Steel forgings and rolled or forged bars for pressure purposes - Technical delivery conditions - Part 5: Stainless steels ISO ISO 9328-7 (2011) Steel flat products for pressure purposes - Technical delivery conditions - Part 7: Stainless steels ISO ISO/TS 15510 (2003) Stainless steels - Chemical composition Stainless steels - Chemical composition.

Chemical composition of X2CrNiMoN22-5-3, X2CrNiMoN22-5-3 mechanical properties, X2CrNiMoN22-5-3 datasheet, X2CrNiMoN22-5-3 equivalent grade, Heat treatment and temperature process of X2CrNiMoN22-5-3.


X2CrNiMoN22-5-3 property sheet

X2CrNiMoN22-5-3 Spec.

ISO ISO 15510 (2010)
Stainless steels -- Chemical composition
ISO ISO 16143-1 (2004)
Stainless steels for general purposes -- Part 1: Flat products
ISO ISO 16143-2 (2004)
Stainless steels for general purposes -- Part 2: Semi-finished products, bars, rods and sections
ISO ISO 16143-3 (2005)
Stainless steels for general purposes -- Part 3: Wire
ISO ISO 9327-5 (1999)
Steel forgings and rolled or forged bars for pressure purposes - Technical delivery conditions - Part 5: Stainless steels
ISO ISO 9328-7 (2011)
Steel flat products for pressure purposes - Technical delivery conditions - Part 7: Stainless steels
ISO ISO/TS 15510 (2003)
Stainless steels - Chemical composition

Chemical Composition of X2CrNiMoN22-5-3

C: Max 0.03
Si: Max 1.00
Mn: Max 2.00
P: Max 0.035
S: Max 0.015
Cr: 21.00 23.00
Ni: 4.50 6.50
Mo: 2.50 3.50
N: 0.10 0.22

Mechanical Properties of X2CrNiMoN22-5-3

Rp0.2 (MPa) 244 (≥)
Rm (MPa) 847 (≥)
AKV (J) 31
A (%) 23
Z (%) 21
Hardness HBW 142

X2CrNiMoN22-5-3 shape and dimensions

X2CrNiMoN22-5-3 Round bar: 1mm-800mm
X2CrNiMoN22-5-3 Square bar: 10mm * 10mm-600mm *600mm
X2CrNiMoN22-5-3 Flat bar: Thickness:8mm-800mm Width:10mm to 1500mm
X2CrNiMoN22-5-3 Sheet or Plate: Thickness:3mm-80mm Width:1.5mm to 1500mm
X2CrNiMoN22-5-3 Strip or Coil: Thickness:0.1mm-3mm Width:1.5mm-1500mm
X2CrNiMoN22-5-3 Forgings: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes