Certified Company
DNV&ABSCertified Company
DNV&ABSCertified Company
ISO 9001:2008R&D Production
In ChinaX6CrNiTiB18-10 material is AFNOR NF EN 10028-7 Flat products made of steels for pressure purposes - Part 7: Stainless steels AFNOR NF EN 10088-1 Stainless steels - Part 1: List of stainless steels AFNOR NF EN 10216-5 (2004) Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes AFNOR NF EN 10222-5 Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels AFNOR NF EN 10269 Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties AFNOR NF EN 10302 (2002) Creep resisting steels, nickel and cobalt alloys Creep resisting steels, nickel and cobalt alloys.
Chemical composition of X6CrNiTiB18-10, X6CrNiTiB18-10 mechanical properties, X6CrNiTiB18-10 datasheet, X6CrNiTiB18-10 equivalent grade, Heat treatment and temperature process of X6CrNiTiB18-10.
AFNOR NF EN 10028-7 Flat products made of steels for pressure purposes - Part 7: Stainless steels |
AFNOR NF EN 10088-1 Stainless steels - Part 1: List of stainless steels |
AFNOR NF EN 10216-5 (2004) Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes |
AFNOR NF EN 10222-5 Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels |
AFNOR NF EN 10269 Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties |
AFNOR NF EN 10302 (2002) Creep resisting steels, nickel and cobalt alloys |
X6CrNiTiB18-10 |
1.4941 |
C: | 0.04 | 0.08 |
Si: | Max | 1.00 |
Mn: | Max | 2.00 |
P: | Max | 0.035 |
S: | Max | 0.015 |
Cr: | 17.00 | 19.00 |
Ni: | 9.00 | 12.00 |
Mo: | Max | Min |
Ti: | 5XC% | 0.80 |
B: | 0.0015 | 0.0050 |
Rp0.2 (MPa) | 695 (≥) |
Rm (MPa) | 179 (≥) |
AKV (J) | 24 |
A (%) | 44 |
Z (%) | 44 |
Hardness | HBW 434 |
X6CrNiTiB18-10 Round bar: | 1mm-800mm |
X6CrNiTiB18-10 Square bar: | 10mm * 10mm-600mm *600mm |
X6CrNiTiB18-10 Flat bar: | Thickness:8mm-800mm Width:10mm to 1500mm |
X6CrNiTiB18-10 Sheet or Plate: | Thickness:3mm-80mm Width:1.5mm to 1500mm |
X6CrNiTiB18-10 Strip or Coil: | Thickness:0.1mm-3mm Width:1.5mm-1500mm |
X6CrNiTiB18-10 Forgings: | Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes |