Certified Company
DNV&ABSCertified Company
DNV&ABSCertified Company
ISO 9001:2008R&D Production
In ChinaX6NiCrSiNCe35-25 material is B.S. BS EN 10088-1 Stainless steels - Part 1: List of stainless steels B.S. BS EN 10095 Heat resisting steels and nickel alloys B.S. BS EN 10296-2 (2005) Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel B.S. BS EN 10297-2 (2005) Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel.
Chemical composition of X6NiCrSiNCe35-25, X6NiCrSiNCe35-25 mechanical properties, X6NiCrSiNCe35-25 datasheet, X6NiCrSiNCe35-25 equivalent grade, Heat treatment and temperature process of X6NiCrSiNCe35-25.
B.S. BS EN 10088-1 Stainless steels - Part 1: List of stainless steels |
B.S. BS EN 10095 Heat resisting steels and nickel alloys |
B.S. BS EN 10296-2 (2005) Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel |
B.S. BS EN 10297-2 (2005) Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel |
X6NiCrSiNCe35-25 |
1.4854 |
C: | 0.04 | 0.08 |
Si: | 1.20 | 2.00 |
Mn: | Max | 2.00 |
P: | Max | 0.040 |
S: | Max | 0.015 |
Cr: | 24.00 | 26.00 |
Ni: | 34.00 | 36.00 |
Al: | Max | Min |
Ce: | 0.03 | 0.08 |
N: | 0.12 | 0.20 |
Rp0.2 (MPa) | 973 (≥) |
Rm (MPa) | 224 (≥) |
AKV (J) | 22 |
A (%) | 33 |
Z (%) | 21 |
Hardness | HBW 343 |
X6NiCrSiNCe35-25 Round bar: | 1mm-800mm |
X6NiCrSiNCe35-25 Square bar: | 10mm * 10mm-600mm *600mm |
X6NiCrSiNCe35-25 Flat bar: | Thickness:8mm-800mm Width:10mm to 1500mm |
X6NiCrSiNCe35-25 Sheet or Plate: | Thickness:3mm-80mm Width:1.5mm to 1500mm |
X6NiCrSiNCe35-25 Strip or Coil: | Thickness:0.1mm-3mm Width:1.5mm-1500mm |
X6NiCrSiNCe35-25 Forgings: | Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes |