Certified Company
DNV&ABSCertified Company
ISO 9001:2008R&D Production
In China
X6NiCrTiMoB25-15-2
X6NiCrTiMoB25-15-2 material is AFNOR NF EN 10028-7 Flat products made of steels for pressure purposes - Part 7: Stainless steels AFNOR NF EN 10088-1 Stainless steels - Part 1: List of stainless steels AFNOR NF EN 10216-5 (2004) Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes AFNOR NF EN 10222-5 Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels AFNOR NF EN 10269 Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties AFNOR NF EN 10302 (2002) Creep resisting steels, nickel and cobalt alloys Creep resisting steels, nickel and cobalt alloys.
Chemical composition of X6NiCrTiMoB25-15-2, X6NiCrTiMoB25-15-2 mechanical properties, X6NiCrTiMoB25-15-2 datasheet, X6NiCrTiMoB25-15-2 equivalent grade, Heat treatment and temperature process of X6NiCrTiMoB25-15-2.
X6NiCrTiMoB25-15-2 property sheet
X6NiCrTiMoB25-15-2 Spec.
| AFNOR NF EN 10028-7 Flat products made of steels for pressure purposes - Part 7: Stainless steels |
| AFNOR NF EN 10088-1 Stainless steels - Part 1: List of stainless steels |
| AFNOR NF EN 10216-5 (2004) Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes |
| AFNOR NF EN 10222-5 Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels |
| AFNOR NF EN 10269 Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties |
| AFNOR NF EN 10302 (2002) Creep resisting steels, nickel and cobalt alloys |
Related Materials
| X6NiCrTiMoB25-15-2 |
Chemical Composition of X6NiCrTiMoB25-15-2
| C: | 0.03 | 0.08 |
| Si: | Max | 1.00 |
| Mn: | 1.00 | 2.00 |
| P: | Max | 0.025 |
| S: | Max | 0.015 |
| Cr: | 13.50 | 16.00 |
| Ni: | 24.00 | 27.00 |
| Mo: | 1.00 | 1.50 |
| Ti: | 1.90 | 2.30 |
| B: | 0.0030 | 0.010 |
| V: | 0.10 | 0.50 |
| Al: | Max | 0.35 |
Mechanical Properties of X6NiCrTiMoB25-15-2
| Rp0.2 (MPa) | 141 (≥) |
| Rm (MPa) | 654 (≥) |
| AKV (J) | 34 |
| A (%) | 43 |
| Z (%) | 34 |
| Hardness | HBW 214 |
X6NiCrTiMoB25-15-2 shape and dimensions
| X6NiCrTiMoB25-15-2 Round bar: | 1mm-800mm |
| X6NiCrTiMoB25-15-2 Square bar: | 10mm * 10mm-600mm *600mm |
| X6NiCrTiMoB25-15-2 Flat bar: | Thickness:8mm-800mm Width:10mm to 1500mm |
| X6NiCrTiMoB25-15-2 Sheet or Plate: | Thickness:3mm-80mm Width:1.5mm to 1500mm |
| X6NiCrTiMoB25-15-2 Strip or Coil: | Thickness:0.1mm-3mm Width:1.5mm-1500mm |
| X6NiCrTiMoB25-15-2 Forgings: | Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes |
©Longhai Special Steel © 2005-2024
