Certified Company
DNV&ABSCertified Company
ISO 9001:2008R&D Production
In China
X7CrNiAl32-21
X7CrNiAl32-21 material is ISO ISO 15510 (2010) Stainless steels -- Chemical composition ISO ISO 16143-3 (2005) Stainless steels for general purposes -- Part 3: Wire ISO ISO 4955 (2005) Heat-resistant steels ISO ISO 9328-5 Steel plates and strips for pressure purposes - Technical delivery conditions - Part 5: Weldable fine grain steels, thermomechanically rolled ISO ISO 9328-7 (2011) Steel flat products for pressure purposes - Technical delivery conditions - Part 7: Stainless steels Steel flat products for pressure purposes - Technical delivery conditions - Part 7: Stainless steels.
Chemical composition of X7CrNiAl32-21, X7CrNiAl32-21 mechanical properties, X7CrNiAl32-21 datasheet, X7CrNiAl32-21 equivalent grade, Heat treatment and temperature process of X7CrNiAl32-21.
X7CrNiAl32-21 property sheet
X7CrNiAl32-21 Spec.
| ISO ISO 15510 (2010) Stainless steels -- Chemical composition |
| ISO ISO 16143-3 (2005) Stainless steels for general purposes -- Part 3: Wire |
| ISO ISO 4955 (2005) Heat-resistant steels |
| ISO ISO 9328-5 Steel plates and strips for pressure purposes - Technical delivery conditions - Part 5: Weldable fine grain steels, thermomechanically rolled |
| ISO ISO 9328-7 (2011) Steel flat products for pressure purposes - Technical delivery conditions - Part 7: Stainless steels |
Related Materials
| X7CrNiAl32-21 |
Chemical Composition of X7CrNiAl32-21
| C: | Max | 0.10 |
| Si: | Max | 1.00 |
| Mn: | Max | 2.00 |
| P: | Max | 0.030 |
| S: | Max | 0.020 |
| Cr: | 19.00 | 23.00 |
| Mo: | Max | Min |
| Ni: | 30.00 | 35.00 |
| Al: | 0.15 | 0.60 |
| Ti: | 0.15 | 0.60 |
| Cu: | Max | 0.75 |
Mechanical Properties of X7CrNiAl32-21
| Rp0.2 (MPa) | 385 (≥) |
| Rm (MPa) | 495 (≥) |
| AKV (J) | 24 |
| A (%) | 11 |
| Z (%) | 14 |
| Hardness | HBW 133 |
X7CrNiAl32-21 shape and dimensions
| X7CrNiAl32-21 Round bar: | 1mm-800mm |
| X7CrNiAl32-21 Square bar: | 10mm * 10mm-600mm *600mm |
| X7CrNiAl32-21 Flat bar: | Thickness:8mm-800mm Width:10mm to 1500mm |
| X7CrNiAl32-21 Sheet or Plate: | Thickness:3mm-80mm Width:1.5mm to 1500mm |
| X7CrNiAl32-21 Strip or Coil: | Thickness:0.1mm-3mm Width:1.5mm-1500mm |
| X7CrNiAl32-21 Forgings: | Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes |
©Longhai Special Steel 2025
