Certified Company
DNV&ABSCertified Company
DNV&ABSCertified Company
ISO 9001:2008R&D Production
In ChinaZ2NCDU25-25-05A material is AFNOR NF A 35-573 Stainless steels for general purposes. Plates, wide strips and strips AFNOR NF A 35-574 Iron and steel. Stainless steel for general purposes. Semi- finished products, bars and wire rod AFNOR NF A 36-209 Iron and steel. Austenitic and austenic-ferritic stainless steels plates for boilers and pressure vessels Iron and steel. Austenitic and austenic-ferritic stainless steels plates for boilers and pressure vessels.
Chemical composition of Z2NCDU25-25-05A, Z2NCDU25-25-05A mechanical properties, Z2NCDU25-25-05A datasheet, Z2NCDU25-25-05A equivalent grade, Heat treatment and temperature process of Z2NCDU25-25-05A.
AFNOR NF A 35-573 Stainless steels for general purposes. Plates, wide strips and strips |
AFNOR NF A 35-574 Iron and steel. Stainless steel for general purposes. Semi- finished products, bars and wire rod |
AFNOR NF A 36-209 Iron and steel. Austenitic and austenic-ferritic stainless steels plates for boilers and pressure vessels |
Z2NCDU25-25-05A |
Z2NCDU25-25-05Az |
C: | Max | 0.020 |
Si: | Max | 0.30 |
Mn: | Max | 2.00 |
P: | Max | 0.025 |
S: | Max | 0.010 |
Cr: | 24.00 | 26.00 |
Mo: | 4.70 | 5.70 |
Ni: | 24.00 | 27.00 |
Cu: | 1.00 | 2.00 |
N: | 0.17 | 0.25 |
Rp0.2 (MPa) | 793 (≥) |
Rm (MPa) | 113 (≥) |
AKV (J) | 11 |
A (%) | 43 |
Z (%) | 11 |
Hardness | HBW 134 |
Z2NCDU25-25-05A Round bar: | 1mm-800mm |
Z2NCDU25-25-05A Square bar: | 10mm * 10mm-600mm *600mm |
Z2NCDU25-25-05A Flat bar: | Thickness:8mm-800mm Width:10mm to 1500mm |
Z2NCDU25-25-05A Sheet or Plate: | Thickness:3mm-80mm Width:1.5mm to 1500mm |
Z2NCDU25-25-05A Strip or Coil: | Thickness:0.1mm-3mm Width:1.5mm-1500mm |
Z2NCDU25-25-05A Forgings: | Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes |