Certified Company
DNV&ABSCertified Company
DNV&ABSCertified Company
ISO 9001:2008R&D Production
In ChinaA 240 Type 2507 material is SAE A 240/A 240M (2013) Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications.
Chemical composition of A 240 Type 2507, A 240 Type 2507 mechanical properties, A 240 Type 2507 datasheet, A 240 Type 2507 equivalent grade, Heat treatment and temperature process of A 240 Type 2507.
SAE A 240/A 240M (2013) Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
A 240 Type 2507 |
A 270 2507 |
A 790 Type 2507 |
A 928 Type 2507 |
A 959 Type 2507 |
SA-240 Type 2507 |
SA-790 Type 2507 |
C: | Max | 0.03 |
Si: | Max | 0.08 |
Mn: | Max | 1.20 |
P: | Max | 0.035 |
S: | Max | 0.02 |
Ni: | 6.00 | 8.00 |
Cr: | 24.00 | 26.00 |
Al: | Max | Min |
Cu: | Max | Min |
Ti: | Max | Min |
Fe: | Max | Min |
N: | 0.24 | 0.32 |
Mo: | 3.00 | 5.00 |
W: | Max | Min |
V: | Max | Min |
Rp0.2 (MPa) | 451 (≥) |
Rm (MPa) | 957 (≥) |
AKV (J) | 23 |
A (%) | 41 |
Z (%) | 24 |
Hardness | HBW 212 |
A 240 Type 2507 Round bar: | 1mm-800mm |
A 240 Type 2507 Square bar: | 10mm * 10mm-600mm *600mm |
A 240 Type 2507 Flat bar: | Thickness:8mm-800mm Width:10mm to 1500mm |
A 240 Type 2507 Sheet or Plate: | Thickness:3mm-80mm Width:1.5mm to 1500mm |
A 240 Type 2507 Strip or Coil: | Thickness:0.1mm-3mm Width:1.5mm-1500mm |
A 240 Type 2507 Forgings: | Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes |