High quality special steel supplier.Old rev.
  • Certified Company

    DNV&ABS
  • Certified Company

    ISO 9001:2008
  • R&D Production

    In China

A 959 Type 2507


A 959 Type 2507 material is SAE A 959 (2011) Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels.

Chemical composition of A 959 Type 2507, A 959 Type 2507 mechanical properties, A 959 Type 2507 datasheet, A 959 Type 2507 equivalent grade, Heat treatment and temperature process of A 959 Type 2507.


A 959 Type 2507 property sheet

A 959 Type 2507 Spec.

SAE A 959 (2011)
Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels

Chemical Composition of A 959 Type 2507

C: Max 0.03
Si: Max 0.08
Mn: Max 1.20
P: Max 0.035
S: Max 0.02
Ni: 6.00 8.00
Cr: 24.00 26.00
Al: Max Min
Cu: Max Min
Ti: Max Min
Fe: Max Min
N: 0.24 0.32
Mo: 3.00 5.00
W: Max Min
V: Max Min

Mechanical Properties of A 959 Type 2507

Rp0.2 (MPa) 629 (≥)
Rm (MPa) 279 (≥)
AKV (J) 33
A (%) 21
Z (%) 13
Hardness HBW 221

A 959 Type 2507 shape and dimensions

A 959 Type 2507 Round bar: 1mm-800mm
A 959 Type 2507 Square bar: 10mm * 10mm-600mm *600mm
A 959 Type 2507 Flat bar: Thickness:8mm-800mm Width:10mm to 1500mm
A 959 Type 2507 Sheet or Plate: Thickness:3mm-80mm Width:1.5mm to 1500mm
A 959 Type 2507 Strip or Coil: Thickness:0.1mm-3mm Width:1.5mm-1500mm
A 959 Type 2507 Forgings: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes