Certified Company
DNV&ABSCertified Company
DNV&ABSCertified Company
ISO 9001:2008R&D Production
In ChinaE307T material is AMS SFA-5.22 Stainless Steel Electrodes for Flux Cored Arc Welding and Stainless Steel Flux Cored Rods for Gas Tungsten Arc Welding Stainless Steel Electrodes for Flux Cored Arc Welding and Stainless Steel Flux Cored Rods for Gas Tungsten Arc Welding.
Chemical composition of E307T, E307T mechanical properties, E307T datasheet, E307T equivalent grade, Heat treatment and temperature process of E307T.
AMS SFA-5.22 Stainless Steel Electrodes for Flux Cored Arc Welding and Stainless Steel Flux Cored Rods for Gas Tungsten Arc Welding |
C: | Max | 0.15 |
Si: | Max | 1.00 |
Mn: | 3.75 | 4.75 |
P: | Max | 0.045 |
S: | Max | 0.03 |
Ni: | 9.00 | 10.50 |
Cr: | 19.00 | 22.00 |
Al: | Max | Min |
Cu: | Max | Min |
Ti: | Max | Min |
Fe: | Max | Min |
N: | Max | Min |
Mo: | Max | Min |
V: | Max | Min |
Rp0.2 (MPa) | 774 (≥) |
Rm (MPa) | 246 (≥) |
AKV (J) | 43 |
A (%) | 12 |
Z (%) | 44 |
Hardness | HBW 413 |
E307T Round bar: | 1mm-800mm |
E307T Square bar: | 10mm * 10mm-600mm *600mm |
E307T Flat bar: | Thickness:8mm-800mm Width:10mm to 1500mm |
E307T Sheet or Plate: | Thickness:3mm-80mm Width:1.5mm to 1500mm |
E307T Strip or Coil: | Thickness:0.1mm-3mm Width:1.5mm-1500mm |
E307T Forgings: | Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes |