Certified Company
DNV&ABSCertified Company
DNV&ABSCertified Company
ISO 9001:2008R&D Production
In ChinaLapelloy material is UNS SAE J 467 (1968) Special Purpose Alloys ("Superalloys") Special Purpose Alloys ("Superalloys").
Chemical composition of Lapelloy, Lapelloy mechanical properties, Lapelloy datasheet, Lapelloy equivalent grade, Heat treatment and temperature process of Lapelloy.
A 565 S42300 |
S42300 |
Lapelloy |
Lapelloy C |
Lapelloy C |
C: | Max | 0.30 |
Si: | Max | 0.25 |
Mn: | Max | 1.00 |
Ni: | Max | 0.30 |
Cr: | Max | 12.00 |
Al: | Max | Min |
Cu: | Max | Min |
Ti: | Max | Min |
Fe: | Max | remaining |
Mo: | Max | 2.75 |
Co: | Max | Min |
V: | Max | 0.25 |
Rp0.2 (MPa) | 427 (≥) |
Rm (MPa) | 418 (≥) |
AKV (J) | 43 |
A (%) | 32 |
Z (%) | 32 |
Hardness | HBW 321 |
Lapelloy Round bar: | 1mm-800mm |
Lapelloy Square bar: | 10mm * 10mm-600mm *600mm |
Lapelloy Flat bar: | Thickness:8mm-800mm Width:10mm to 1500mm |
Lapelloy Sheet or Plate: | Thickness:3mm-80mm Width:1.5mm to 1500mm |
Lapelloy Strip or Coil: | Thickness:0.1mm-3mm Width:1.5mm-1500mm |
Lapelloy Forgings: | Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes |