Certified Company
DNV&ABSCertified Company
DNV&ABSCertified Company
ISO 9001:2008R&D Production
In ChinaR-235 material is SAE SAE J 467 (1968) Special Purpose Alloys ("Superalloys") Special Purpose Alloys ("Superalloys").
Chemical composition of R-235, R-235 mechanical properties, R-235 datasheet, R-235 equivalent grade, Heat treatment and temperature process of R-235.
C: | Max | 0.12 |
Si: | Max | 0.30 |
Mn: | Max | 0.10 |
Cr: | Max | 15.00 |
Ni: | Max | remaining |
Mo: | Max | 5.50 |
Co: | Max | 1.00 |
W: | Max | Min |
Al: | Max | 2.00 |
Cu: | Max | Min |
Ti: | Max | 2.50 |
Fe: | Max | 10.00 |
Rp0.2 (MPa) | 158 (≥) |
Rm (MPa) | 123 (≥) |
AKV (J) | 32 |
A (%) | 34 |
Z (%) | 33 |
Hardness | HBW 211 |
R-235 Round bar: | 1mm-800mm |
R-235 Square bar: | 10mm * 10mm-600mm *600mm |
R-235 Flat bar: | Thickness:8mm-800mm Width:10mm to 1500mm |
R-235 Sheet or Plate: | Thickness:3mm-80mm Width:1.5mm to 1500mm |
R-235 Strip or Coil: | Thickness:0.1mm-3mm Width:1.5mm-1500mm |
R-235 Forgings: | Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes |