Certified Company
DNV&ABSCertified Company
DNV&ABSCertified Company
ISO 9001:2008R&D Production
In ChinaUdimet 500 material is AMS SAE AMS 5751E (1982) Alloy Bars, Forgings, and Rings, Corrosion and Heat Resistant 54Ni - 17.5Cr - 16.5Co - 4.0Mo - 2.9Ti - 2.9Al - 0.006B Solution, Stabilization, and Precipitation Heat Treated Consumable Electrode or Vacuum Induction Melted Alloy Bars, Forgings, and Rings, Corrosion and Heat Resistant 54Ni - 17.5Cr - 16.5Co - 4.0Mo - 2.9Ti - 2.9Al - 0.006B Solution, Stabilization, and Precipitation Heat Treated Consumable Electrode or Vacuum Induction Melted.
Chemical composition of Udimet 500, Udimet 500 mechanical properties, Udimet 500 datasheet, Udimet 500 equivalent grade, Heat treatment and temperature process of Udimet 500.
AMS SAE AMS 5751E (1982) Alloy Bars, Forgings, and Rings, Corrosion and Heat Resistant 54Ni - 17.5Cr - 16.5Co - 4.0Mo - 2.9Ti - 2.9Al - 0.006B Solution, Stabilization, and Precipitation Heat Treated Consumable Electrode or Vacuum Induction Melted |
Udimet 500 |
Udimet 500 |
Udimet 500 |
Udimet 500 |
Udimet 500 |
C: | 0.05 | 0.10 |
Si: | Max | 0.10 |
Mn: | Max | 0.10 |
Cr: | Max | 19.00 |
Ni: | Max | remaining |
Mo: | Max | 4.00 |
Co: | Max | 19.00 |
W: | Max | Min |
Al: | Max | 3.00 |
Cu: | Max | Min |
Ti: | Max | 3.00 |
Fe: | Max | Min |
Zr: | Max | 0.06 |
B: | Max | 0.005 |
Rp0.2 (MPa) | 115 (≥) |
Rm (MPa) | 634 (≥) |
AKV (J) | 21 |
A (%) | 11 |
Z (%) | 23 |
Hardness | HBW 134 |
Udimet 500 Round bar: | 1mm-800mm |
Udimet 500 Square bar: | 10mm * 10mm-600mm *600mm |
Udimet 500 Flat bar: | Thickness:8mm-800mm Width:10mm to 1500mm |
Udimet 500 Sheet or Plate: | Thickness:3mm-80mm Width:1.5mm to 1500mm |
Udimet 500 Strip or Coil: | Thickness:0.1mm-3mm Width:1.5mm-1500mm |
Udimet 500 Forgings: | Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes |