Certified Company
DNV&ABSCertified Company
ISO 9001:2008R&D Production
In China
Udimet 500
Udimet 500 material is SAE SAE AMS 5384E (1986) Alloy Castings, Investment, Corrosion and Heat Resistant 53Ni - 18Cr - 18Co - 4.0Mo - 2.9Ti - 2.9Al - 0.006B Vacuum-Melted, Vacuum-Cast, Solution and Precipitation Heat Treated Alloy Castings, Investment, Corrosion and Heat Resistant 53Ni - 18Cr - 18Co - 4.0Mo - 2.9Ti - 2.9Al - 0.006B Vacuum-Melted, Vacuum-Cast, Solution and Precipitation Heat Treated.
Chemical composition of Udimet 500, Udimet 500 mechanical properties, Udimet 500 datasheet, Udimet 500 equivalent grade, Heat treatment and temperature process of Udimet 500.
Udimet 500 property sheet
Udimet 500 Spec.
| SAE SAE AMS 5384E (1986) Alloy Castings, Investment, Corrosion and Heat Resistant 53Ni - 18Cr - 18Co - 4.0Mo - 2.9Ti - 2.9Al - 0.006B Vacuum-Melted, Vacuum-Cast, Solution and Precipitation Heat Treated |
Related Materials
| Udimet 500 |
| Udimet 500 |
| Udimet 500 |
| Udimet 500 |
| Udimet 500 |
Chemical Composition of Udimet 500
| C: | 0.05 | 0.10 |
| Si: | Max | 0.10 |
| Mn: | Max | 0.10 |
| Cr: | Max | 19.00 |
| Ni: | Max | remaining |
| Mo: | Max | 4.00 |
| Co: | Max | 19.00 |
| W: | Max | Min |
| Al: | Max | 3.00 |
| Cu: | Max | Min |
| Ti: | Max | 3.00 |
| Fe: | Max | Min |
| Zr: | Max | 0.06 |
| B: | Max | 0.005 |
Mechanical Properties of Udimet 500
| Rp0.2 (MPa) | 342 (≥) |
| Rm (MPa) | 326 (≥) |
| AKV (J) | 23 |
| A (%) | 23 |
| Z (%) | 31 |
| Hardness | HBW 133 |
Udimet 500 shape and dimensions
| Udimet 500 Round bar: | 1mm-800mm |
| Udimet 500 Square bar: | 10mm * 10mm-600mm *600mm |
| Udimet 500 Flat bar: | Thickness:8mm-800mm Width:10mm to 1500mm |
| Udimet 500 Sheet or Plate: | Thickness:3mm-80mm Width:1.5mm to 1500mm |
| Udimet 500 Strip or Coil: | Thickness:0.1mm-3mm Width:1.5mm-1500mm |
| Udimet 500 Forgings: | Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes |
©Longhai Special Steel © 2005-2024
