Certified Company
DNV&ABSCertified Company
DNV&ABSCertified Company
ISO 9001:2008R&D Production
In ChinaW30733 material is Austenitic Cr-Ni-Mn stainless steel flux cored wire (E307T0-3).
Chemical composition of W30733, W30733 mechanical properties, W30733 datasheet, W30733 equivalent grade, Heat treatment and temperature process of W30733.
C: | Max | 0.15 |
Si: | Max | 1.00 |
Mn: | 3.75 | 4.75 |
P: | Max | 0.045 |
S: | Max | 0.03 |
Ni: | 9.00 | 10.50 |
Cr: | 19.00 | 22.00 |
Al: | Max | Min |
Cu: | Max | Min |
Ti: | Max | Min |
Fe: | Max | Min |
N: | Max | Min |
Mo: | Max | Min |
V: | Max | Min |
Rp0.2 (MPa) | 183 (≥) |
Rm (MPa) | 695 (≥) |
AKV (J) | 12 |
A (%) | 41 |
Z (%) | 12 |
Hardness | HBW 343 |
W30733 Round bar: | 1mm-800mm |
W30733 Square bar: | 10mm * 10mm-600mm *600mm |
W30733 Flat bar: | Thickness:8mm-800mm Width:10mm to 1500mm |
W30733 Sheet or Plate: | Thickness:3mm-80mm Width:1.5mm to 1500mm |
W30733 Strip or Coil: | Thickness:0.1mm-3mm Width:1.5mm-1500mm |
W30733 Forgings: | Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes |