High quality special steel supplier.Old rev.
  • Certified Company

    DNV&ABS
  • Certified Company

    ISO 9001:2008
  • R&D Production

    In China

Z 3 CND 17-11-02


Z 3 CND 17-11-02 material is DIN NF A 35-573 Stainless steels for general purposes. Plates, wide strips and strips DIN NF A 35-574 Iron and steel. Stainless steel for general purposes. Semi- finished products, bars and wire rod DIN NF A 36-209 Iron and steel. Austenitic and austenic-ferritic stainless steels plates for boilers and pressure vessels DIN NF A 49-244 Steel tubes - Welded austenitic stainless and austenitic ferritic steel rolled tubes for pressure service - Dimensions, technical conditions for delivery DIN NF E 29-043 Non alloy and alloy steel bolting for pressure equipement - Specifications Austenitic stainless steel. Grade 00Cr17Ni14Mo2 was replaced by new designation 022Cr17Ni12Mo2 according to GB/T 20878 (2007) .

Chemical composition of Z 3 CND 17-11-02, Z 3 CND 17-11-02 mechanical properties, Z 3 CND 17-11-02 datasheet, Z 3 CND 17-11-02 equivalent grade, Heat treatment and temperature process of Z 3 CND 17-11-02.


Z 3 CND 17-11-02 property sheet

Z 3 CND 17-11-02 Spec.

DIN NF A 35-573
Stainless steels for general purposes. Plates, wide strips and strips
DIN NF A 35-574
Iron and steel. Stainless steel for general purposes. Semi- finished products, bars and wire rod
DIN NF A 36-209
Iron and steel. Austenitic and austenic-ferritic stainless steels plates for boilers and pressure vessels
DIN NF A 49-244
Steel tubes - Welded austenitic stainless and austenitic ferritic steel rolled tubes for pressure service - Dimensions, technical conditions for delivery
DIN NF E 29-043
Non alloy and alloy steel bolting for pressure equipement - Specifications

Chemical Composition of Z 3 CND 17-11-02

C: Max 0.030
Si: Max 1.00
Mn: Max 2.00
P: Max 0.035
S: Max 0.030
Ni: 12.00 15.00
Cr: 16.00 18.00
Mo: 2.00 3.00

Mechanical Properties of Z 3 CND 17-11-02

Rp0.2 (MPa) 949 (≥)
Rm (MPa) 548 (≥)
AKV (J) 12
A (%) 33
Z (%) 44
Hardness HBW 144

Z 3 CND 17-11-02 shape and dimensions

Z 3 CND 17-11-02 Round bar: 1mm-800mm
Z 3 CND 17-11-02 Square bar: 10mm * 10mm-600mm *600mm
Z 3 CND 17-11-02 Flat bar: Thickness:8mm-800mm Width:10mm to 1500mm
Z 3 CND 17-11-02 Sheet or Plate: Thickness:3mm-80mm Width:1.5mm to 1500mm
Z 3 CND 17-11-02 Strip or Coil: Thickness:0.1mm-3mm Width:1.5mm-1500mm
Z 3 CND 17-11-02 Forgings: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes