Certified Company
DNV&ABSCertified Company
DNV&ABSCertified Company
ISO 9001:2008R&D Production
In ChinaX6NiCrTiMoVB25-15-2 material is EN EN 10302: 2008 Creep resisting steels, nickel and cobalt alloys EN EN 10269: 1999 Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties EN EN 10088-1: 2005 Stainless steels. List of stainless steels Creep resisting steels, nickel and cobalt alloys.
Chemical composition of X6NiCrTiMoVB25-15-2, X6NiCrTiMoVB25-15-2 mechanical properties, X6NiCrTiMoVB25-15-2 datasheet, X6NiCrTiMoVB25-15-2 equivalent grade, Heat treatment and temperature process of X6NiCrTiMoVB25-15-2.
EN EN 10302: 2008 Creep resisting steels, nickel and cobalt alloys |
EN EN 10269: 1999 Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties |
EN EN 10088-1: 2005 Stainless steels. List of stainless steels |
1.4980 |
X6NiCrTiMoVB25-15-2 |
IncoloyA-286 |
X6NiCrTiMoVB25-15-2 |
Z5NCTDV26-15B |
Z6NCTDV25-15B |
C: | Max | 0.08 |
Cr: | 13.50 | 16.00 |
Ni: | 24.00 | 27.00 |
Mo: | 1.00 | 1.50 |
Ti: | 1.75 | 2.30 |
V: | 0.10 | 0.50 |
B: | 0.001 | 0.010 |
Mn: | 1.00 | 2.00 |
Fe: | Max | Bal |
Al: | Max | 0.40 |
Si: | Max | 1.00 |
P: | Max | 0.030 |
S: | Max | 0.020 |
Rp0.2 (MPa) | 618 (≥) |
Rm (MPa) | 881 (≥) |
AKV (J) | 42 |
A (%) | 34 |
Z (%) | 34 |
Hardness | HBW 221 |
X6NiCrTiMoVB25-15-2 Round bar: | 1mm-800mm |
X6NiCrTiMoVB25-15-2 Square bar: | 10mm * 10mm-600mm *600mm |
X6NiCrTiMoVB25-15-2 Flat bar: | Thickness:8mm-800mm Width:10mm to 1500mm |
X6NiCrTiMoVB25-15-2 Sheet or Plate: | Thickness:3mm-80mm Width:1.5mm to 1500mm |
X6NiCrTiMoVB25-15-2 Strip or Coil: | Thickness:0.1mm-3mm Width:1.5mm-1500mm |
X6NiCrTiMoVB25-15-2 Forgings: | Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes |