Certified Company
DNV&ABSCertified Company
DNV&ABSCertified Company
ISO 9001:2008R&D Production
In ChinaHR50F45 material is B.S. BS 1449-1-1.4 Steel plate, sheet and strip. Carbon and carbon-manganese plate, sheet and strip. Specification for hot rolled wide material based on specified minimum strength Steel plate, sheet and strip. Carbon and carbon-manganese plate, sheet and strip. Specification for hot rolled wide material based on specified minimum strength.
Chemical composition of HR50F45, HR50F45 mechanical properties, HR50F45 datasheet, HR50F45 equivalent grade, Heat treatment and temperature process of HR50F45.
B.S. BS 1449-1-1.4 Steel plate, sheet and strip. Carbon and carbon-manganese plate, sheet and strip. Specification for hot rolled wide material based on specified minimum strength |
C: | 0.08 | 0.15 |
Si: | Max | 1.00 |
Mn: | Max | 1.00 |
P: | Max | Min |
S: | Max | 0.020 |
Cr: | 18.00 | 21.00 |
Ni: | Max | remaining |
Mo: | Max | Min |
Co: | Max | 5.00 |
Ti: | 0.20 | 0.60 |
Fe: | Max | 5.00 |
Al: | Max | Min |
Cu: | Max | 0.50 |
B: | Max | Min |
Bi: | Max | Min |
Pb: | Max | 0.0050 |
Ag: | Max | Min |
Rp0.2 (MPa) | 459 (≥) |
Rm (MPa) | 884 (≥) |
AKV (J) | 12 |
A (%) | 12 |
Z (%) | 33 |
Hardness | HBW 424 |
HR50F45 Round bar: | 1mm-800mm |
HR50F45 Square bar: | 10mm * 10mm-600mm *600mm |
HR50F45 Flat bar: | Thickness:8mm-800mm Width:10mm to 1500mm |
HR50F45 Sheet or Plate: | Thickness:3mm-80mm Width:1.5mm to 1500mm |
HR50F45 Strip or Coil: | Thickness:0.1mm-3mm Width:1.5mm-1500mm |
HR50F45 Forgings: | Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes |