Certified Company
DNV&ABSCertified Company
DNV&ABSCertified Company
ISO 9001:2008R&D Production
In ChinaHR5 material is B.S. BS 2HR 5 (2010) Specification for nickel-chromium-titanium heat-resisting alloy billets, bars, forgings and parts (nickel base, Cr 19.5, Ti 0.4) B.S. BS HR 5 Specification for nickel-chromium-titanium heat-resisting alloy billets, bars, forgings and parts (nickel base, Cr 19.5, Ti 0.4) Specification for nickel-chromium-titanium heat-resisting alloy billets, bars, forgings and parts (nickel base, Cr 19.5, Ti 0.4).
Chemical composition of HR5, HR5 mechanical properties, HR5 datasheet, HR5 equivalent grade, Heat treatment and temperature process of HR5.
B.S. BS 2HR 5 (2010) Specification for nickel-chromium-titanium heat-resisting alloy billets, bars, forgings and parts (nickel base, Cr 19.5, Ti 0.4) |
B.S. BS HR 5 Specification for nickel-chromium-titanium heat-resisting alloy billets, bars, forgings and parts (nickel base, Cr 19.5, Ti 0.4) |
C: | 0.08 | 0.15 |
Si: | Max | 1.00 |
Mn: | Max | 1.00 |
P: | Max | Min |
S: | Max | 0.020 |
Cr: | 18.00 | 21.00 |
Ni: | Max | remaining |
Mo: | Max | Min |
Co: | Max | 5.00 |
Ti: | 0.20 | 0.60 |
Fe: | Max | 5.00 |
Al: | Max | Min |
Cu: | Max | 0.50 |
B: | Max | Min |
Bi: | Max | Min |
Pb: | Max | 0.0050 |
Ag: | Max | Min |
Rp0.2 (MPa) | 397 (≥) |
Rm (MPa) | 399 (≥) |
AKV (J) | 33 |
A (%) | 32 |
Z (%) | 23 |
Hardness | HBW 341 |
HR5 Round bar: | 1mm-800mm |
HR5 Square bar: | 10mm * 10mm-600mm *600mm |
HR5 Flat bar: | Thickness:8mm-800mm Width:10mm to 1500mm |
HR5 Sheet or Plate: | Thickness:3mm-80mm Width:1.5mm to 1500mm |
HR5 Strip or Coil: | Thickness:0.1mm-3mm Width:1.5mm-1500mm |
HR5 Forgings: | Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes |