Certified Company
DNV&ABSCertified Company
DNV&ABSCertified Company
ISO 9001:2008R&D Production
In China2.4669 material is DIN DIN EN 10088-1 Stainless steels - Part 1: List of stainless steels DIN DIN EN 10269 Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties DIN DIN EN 10302 (2002) Creep resisting steels, nickel and cobalt alloys NiCrFeTi alloy; High-temperature resisting material.
Chemical composition of 2.4669, 2.4669 mechanical properties, 2.4669 datasheet, 2.4669 equivalent grade, Heat treatment and temperature process of 2.4669.
DIN DIN EN 10088-1 Stainless steels - Part 1: List of stainless steels |
DIN DIN EN 10269 Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties |
DIN DIN EN 10302 (2002) Creep resisting steels, nickel and cobalt alloys |
2.4669 |
NiCr15Fe7TiAl |
N07750 |
B 637 N07750 Type 1 |
B 637 N07750 Type 2 |
SB-637 N07750 Type 1 |
Inconel X750 |
N07750 |
NiCr15Fe7TiAl |
C: | Max | 0.08 |
Mn: | Max | 1.0 |
Si: | Max | 0.5 |
S: | Max | 0.01 |
P: | Max | 0.015 |
Cu: | Max | 0.5 |
Fe: | 5.0 | 9.0 |
Co: | Max | 1.0 |
Nb: | 0.70 | 1.20 |
Cr: | 14.0 | 17.0 |
Ni: | 70 | Min |
Al: | 0.40 | 1.00 |
Ti: | 2.25 | 2.75 |
Rp0.2 (MPa) | 448 (≥) |
Rm (MPa) | 784 (≥) |
AKV (J) | 13 |
A (%) | 24 |
Z (%) | 31 |
Hardness | HBW 124 |
2.4669 Round bar: | 1mm-800mm |
2.4669 Square bar: | 10mm * 10mm-600mm *600mm |
2.4669 Flat bar: | Thickness:8mm-800mm Width:10mm to 1500mm |
2.4669 Sheet or Plate: | Thickness:3mm-80mm Width:1.5mm to 1500mm |
2.4669 Strip or Coil: | Thickness:0.1mm-3mm Width:1.5mm-1500mm |
2.4669 Forgings: | Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes |