High quality special steel supplier.Old rev.
  • Certified Company

    DNV&ABS
  • Certified Company

    ISO 9001:2008
  • R&D Production

    In China

NiCr15Fe7TiAl


NiCr15Fe7TiAl material is DIN DIN EN 10088-1 Stainless steels - Part 1: List of stainless steels DIN DIN EN 10269 Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties DIN DIN EN 10302 (2002) Creep resisting steels, nickel and cobalt alloys NiCrFeTi alloy; High-temperature resisting material.

Chemical composition of NiCr15Fe7TiAl, NiCr15Fe7TiAl mechanical properties, NiCr15Fe7TiAl datasheet, NiCr15Fe7TiAl equivalent grade, Heat treatment and temperature process of NiCr15Fe7TiAl.


NiCr15Fe7TiAl property sheet

NiCr15Fe7TiAl Spec.

DIN DIN EN 10088-1
Stainless steels - Part 1: List of stainless steels
DIN DIN EN 10269
Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
DIN DIN EN 10302 (2002)
Creep resisting steels, nickel and cobalt alloys

Chemical Composition of NiCr15Fe7TiAl

C: Max 0.08
Mn: Max 1.0
Si: Max 0.5
S: Max 0.01
P: Max 0.015
Cu: Max 0.5
Fe: 5.0 9.0
Co: Max 1.0
Nb: 0.70 1.20
Cr: 14.0 17.0
Ni: 70 Min
Al: 0.40 1.00
Ti: 2.25 2.75

Mechanical Properties of NiCr15Fe7TiAl

Rp0.2 (MPa) 562 (≥)
Rm (MPa) 868 (≥)
AKV (J) 23
A (%) 24
Z (%) 43
Hardness HBW 112

NiCr15Fe7TiAl shape and dimensions

NiCr15Fe7TiAl Round bar: 1mm-800mm
NiCr15Fe7TiAl Square bar: 10mm * 10mm-600mm *600mm
NiCr15Fe7TiAl Flat bar: Thickness:8mm-800mm Width:10mm to 1500mm
NiCr15Fe7TiAl Sheet or Plate: Thickness:3mm-80mm Width:1.5mm to 1500mm
NiCr15Fe7TiAl Strip or Coil: Thickness:0.1mm-3mm Width:1.5mm-1500mm
NiCr15Fe7TiAl Forgings: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes