Certified Company
DNV&ABSCertified Company
DNV&ABSCertified Company
ISO 9001:2008R&D Production
In ChinaB 637 N07750 Type 1 material is ASTM B 637 (2012) Precipitation-Hardening and Cold Worked Nickel Alloy Bars, Forgings, and Forging Stock for Moderate or High Temperature Service Precipitation-Hardening and Cold Worked Nickel Alloy Bars, Forgings, and Forging Stock for Moderate or High Temperature Service.
Chemical composition of B 637 N07750 Type 1, B 637 N07750 Type 1 mechanical properties, B 637 N07750 Type 1 datasheet, B 637 N07750 Type 1 equivalent grade, Heat treatment and temperature process of B 637 N07750 Type 1.
ASTM B 637 (2012) Precipitation-Hardening and Cold Worked Nickel Alloy Bars, Forgings, and Forging Stock for Moderate or High Temperature Service |
2.4669 |
NiCr15Fe7TiAl |
N07750 |
B 637 N07750 Type 1 |
B 637 N07750 Type 2 |
SB-637 N07750 Type 1 |
Inconel X750 |
N07750 |
NiCr15Fe7TiAl |
C: | Max | 0.08 |
Mn: | Max | 1.0 |
Si: | Max | 0.5 |
S: | Max | 0.01 |
P: | Max | 0.015 |
Cu: | Max | 0.5 |
Fe: | 5.0 | 9.0 |
Co: | Max | 1.0 |
Nb: | 0.70 | 1.20 |
Cr: | 14.0 | 17.0 |
Ni: | 70 | Min |
Al: | 0.40 | 1.00 |
Ti: | 2.25 | 2.75 |
Rp0.2 (MPa) | 835 (≥) |
Rm (MPa) | 355 (≥) |
AKV (J) | 21 |
A (%) | 22 |
Z (%) | 34 |
Hardness | HBW 334 |
B 637 N07750 Type 1 Round bar: | 1mm-800mm |
B 637 N07750 Type 1 Square bar: | 10mm * 10mm-600mm *600mm |
B 637 N07750 Type 1 Flat bar: | Thickness:8mm-800mm Width:10mm to 1500mm |
B 637 N07750 Type 1 Sheet or Plate: | Thickness:3mm-80mm Width:1.5mm to 1500mm |
B 637 N07750 Type 1 Strip or Coil: | Thickness:0.1mm-3mm Width:1.5mm-1500mm |
B 637 N07750 Type 1 Forgings: | Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes |